Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone, HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.
Contact Now
Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.
Contact Now
Structural formulaOR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3(n~2)/2 Modified products Type ItemHPMCYT1YT100M YT100MN YT1365 YT150MSSpecification of non modified products TypeItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSNon surfacetreatmentPD100MPD150MPD200MPD300M/EM40MEM60MEM70MEM100MEM150MEM200MSurface treatmentPD100MSPD150MSPD200MSPK8000S PK100MS PK150MS PK200MSEM6000SEM8000SEM10MSEM20MSEM30MSEM60MSEM100MSEM150MSEM200MSGel temperature ℃58.0~64.070.0~90.070.0~90.0pH5.0~9.05.0~
Contact Now
Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone, HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.
Contact Now
Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose mixed ether made from cotton and wood through alkalization, propylene oxide and methyl chloride etherification.
Contact Now
HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving. Hydroxypropyl starch with high degree of substitution can be used as printing paste.4.pharmaceutical industry, used as&nb
Contact Now
Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.
Contact Now
Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.
Contact Now
Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.
Contact Now
It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula &n
Contact Now
Structural formulaOR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 (n~2)/2 Modified products TypeItemHPMCYT1YT100M YT100MN YT1365 YT150MSSpecification of non modified products TypeItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSNon surfacetreatmentPD100MPD150MPD200MPD300M/EM40MEM60MEM70MEM100MEM150MEM200MSurface treatmentPD100MSPD150MSPD200MSPK8000S PK100MS PK150MS PK200MSEM6000SEM8000SEM10MSEM20MSEM30MSEM60MSEM100MSEM150MSEM200MSGel temperature ℃58.0~64.070.0~
Contact Now
Hydroxyethyl methyl cellulose (HEMC) is widely used in water-based latex coatings, building construction and building materials, printing ink, oil drilling and other aspects, play the role of thickening water retention, improve the construction, used in wet and dry mortar series products. Its properties are similar to methyl cellulose, but because of the presence of hydroxyethyl makes hydroxyethyl cellulose more soluble in water, the solution is more compatible with salt, and has a higher condensation temperature.Structural formula (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]n
Contact Now
Hydroxyethyl methyl cellulose (HEMC) is one of the most popular cellulose ethers.
Contact Now
It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula
Contact Now
Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone, HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.
Contact Now
HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving. Hydroxypropyl starch with high degree of substitution can be used as printing paste.4.pharmaceutical industry, used as&nb
Contact Now
Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products TypeItemHPMCputtyYT100M YT100MN YT1365 YT150MSmortarYT200M YT200MSSelf levelingYT400GypsumYT-7166 Specification of non modified products &n
Contact Now
Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.
Contact Now
Hydroxypropyl methyl cellulose(HPMC) is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products TypeItemHPMCputtyYT100M YT100MN YT1365 YT150MSmortarYT200M YT200MSSelf levelingYT400GypsumYT-7166 Specification of non modified products TypeItem60HPMCE65
Contact Now
Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution. The degree of substitution and modification of substituent, allows the different chemical properties and benefits after alkalization and etherification reactions with Sodium hydroxide,Cholromethane,and ethylene oxide.HEMC is better performance in terms of higher gel temperature and hydrophilicity rely on ethyl substituent groups.Structural formula (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(C
Contact Now
Food grade HPMC , also abbreviated as hypromellose , is a kind of non-ionic cellulose ether. It is a semi-synthetic, inactive, viscoelastic polymer, often used in ophthalmology as a lubrication department, or as an ingredient or excipient in food additives, and is commonly found in various types of commodities.
Contact Now
Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone, HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.
Contact Now
ETON HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material.It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.
Contact Now
HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving. Hydroxypropyl starch with high degree of substitution can be used as printing paste.4.pharmaceutical industry, used
Contact Now