anti-sagging-manufacture,factory,supplier from China

(Total 24 Products for anti-sagging)
Cellulose ethers are often used as water-retaining agents in (desulfurized) gypsum mortar. Years of research have shown that,water-retaining agent has a very important influence on the gypsum quality and anti-plastering layer performance of plastering gypsum.
Contact Now
HEMC are often used as water-retaining agents in (desulfurized) gypsum mortar. Years of research have shown that,water-retaining agent has a very important influence on the gypsum quality and anti-plastering layer performance of plastering gypsum.
Contact Now
As one of the most important raw materials in tile adhesive, cellulose ether plays a crucial role in the performance of tile adhesive. The role of cellulose ether in tile adhesive is mainly manifested in thickening, water retention, delaying cement hydration, improving workability, improving anti-slip performance and rheology, plasticity and lubricating properties, extending open time, enhancing bond strength, etc.
Contact Now
 It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula                          
Contact Now
It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula               &n
Contact Now
• Improve sag resistance & anti-slap• Optimize rheological behaviour, particularly the flow characteristics and workability• Enhance adhesion strength• Increase mortar yield• Cost-effective. Obtain desired thickening effect with very low dosage. MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance.
Contact Now
Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.
Contact Now
Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.
Contact Now
HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs. These vegetable capsules are an attractive, all-natural dosage form that retain all the advantages - easy to swallow, effectively mask taste and odor, and allow product visibility. HPMC capsules are also starch-free, gluten-free and preservative-free, and meet the strict dietary needs of customers that choose a vegetarian lifestyle.
Contact Now
Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.
Contact Now
Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.
Contact Now
HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.
Contact Now
The hydroxypropyl methyl cellulose ether hpmc is supplied with a water-repellent and thickening-presenting cellulose ether.Redispersible polymer powder growing the tile ceramic adhesion .The hpmc can substantially growth the power of the tile adhesive and enhance the stress, and growth the power.Structural formula (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface&
Contact Now
Honeycomb ceramics are widely used in power generation, desulfurization and denitrification, and automobile exhaust gas treatment. With the advancement of technology, more and more thin-walled honeycomb ceramic technology is used.
Contact Now
HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs. These vegetable capsules are an attractive, all-natural dosage form that retain all the advantages - easy to swallow, effectively mask taste and odor, and allow product visibility. HPMC capsules are also starch-free, gluten-free and preservative-free, and meet the strict dietary needs of customers that choose a vegetarian lifestyle.
Contact Now
HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs. These vegetable capsules are an attractive, all-natural dosage form that retain all the advantages - easy to swallow, effectively mask taste and odor, and allow product visibility. HPMC capsules are also starch-free, gluten-free and preservative-free, and meet the strict dietary needs of customers that choose a vegetarian lifestyle.
Contact Now
The hydroxypropyl methyl cellulose ether hpmc is the essential condition for thin bed technology for tile adhesive.Can be used as retarder, water retention agent, thickener and binder.For example, the performance of mortar is very different between natural sand and machine-made sand. Cellulose ether for ordinary dry mixed mortar shall have the following characteristics:Structural formula  (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified&nbs
Contact Now
Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.
Contact Now
The hydroxypropyl methyl cellulose ether hpmc is supplied with a water-repellent and thickening-presenting cellulose ether.Redispersible polymer powder growing the tile ceramic adhesion .The hpmc can substantially growth the power of the tile adhesive and enhance the stress, and growth the power.Structural formula (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface treatmentPD100MPD150MPD200MPK40M PK100M&
Contact Now
HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs. These vegetable capsules are an attractive, all-natural dosage form that retain all the advantages - easy to swallow, effectively mask taste and odor, and allow product visibility. HPMC capsules are also starch-free, gluten-free and preservative-free, and meet the strict dietary needs of customers that choose a vegetarian lifestyle.
Contact Now
HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs. These vegetable capsules are an attractive, all-natural dosage form that retain all the advantages - easy to swallow, effectively mask taste and odor, and allow product visibility. HPMC capsules are also starch-free, gluten-free and preservative-free, and meet the strict dietary needs of customers that choose a vegetarian lifestyle.
Contact Now
HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.
Contact Now
HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs.
Contact Now
Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution. The degree of substitution and modification of substituent, allows the different chemical properties and benefits after alkalization and etherification reactions with Sodium hydroxide,Cholromethane,and ethylene oxide.HEMC is better performance in terms of higher gel temperature and hydrophilicity rely on ethyl substituent groups.Structural formula (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(C
Contact Now
Relate News
ETON HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material.It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.
 It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula                          
HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs.
      MELLUTEL™ E5Hydroxypropyl Methyl Cellulose (HPMC) Product DescriptionMELLUTEL™ E5 is a non-ionic, dissolving in cold or hot water.
MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance. It can be used together with cellulose ether to improve the thickening features of cellulose- ethers used for products in the construction industry like plaster, filler and tile-adhesive etc.Application Data Presentation
Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.
Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.
HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving.
Hydroxypropyl methylcellulose (HPMC) and hydroxyethyl methylcellulose (HEMC) are widely used building materials, when applied to gypsum-based plastering, it has the following characteristics:Water Retention: Retains in the mortar, allowing the gypsum to fully set.
• Improve sag resistance & anti-slap• Optimize rheological behaviour, particularly the flow characteristics and workability• Enhance adhesion strength• Increase mortar yield• Cost-effective. Obtain desired thickening effect with very low dosage. MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance.
Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products &n
Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.
Cellulose ethers are often used as water-retaining agents in (desulfurized) gypsum mortar. Years of research have shown that,water-retaining agent has a very important influence on the gypsum quality and anti-plastering layer performance of plastering gypsum.
Hydroxypropyl Methyl Cellulose (Mellutel YT-50) is beside Polyvinylalcohol (PVA) one of the most commonly used suspending agents. Mellutel YT-50 controls the particle size and their distribution, influences the porosity and defines the bulk weight of PVC. The porosity of the polymer particles is strongly linked to the property to adsorb additives like plasticizers or stabilizers. Thereby, the properties of the polymer during processing and of the final product can be controlled. Ultra low viscous Mellutel YT-50 is the most suitable product for PVC manufacturing processes.
Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.
The role of cellulose ether in honeycomb ceramics is very important.
HPMC Vegetable Empty Capsule: Vegetable Capsule - Visible HealthVegetable Raw MaterialETON capsule is made of HPMC, a kind of vegetable material which is animal free. It is separated from animal material totally. No animal remaining in the products at all. It is created under the direction of green, health and safety.Advantages:Lower Moisture:It is right for stuffing which is easy to absorb moisture and/or react with moisture content.Stability:No cross linking reaction because of high stability. HPMC is a kind of vegetable cellulose which contains no amino acid.
Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.
MELLUTEL™ PCH200MS is a white or off-white powder, odorless, tasteless and non-toxic. Soluble in a mixture of cold water and organic solvents to form a transparent viscous solution.
Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products &n
HPMC has good dispersing, emulsifying, thickening, bonding, water and glue retention properties, and is used as thickener, dispersant, binder, excipient, oil resistant coating, filler, emulsifier and stabilizer.Structural formula  (n~2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products     TypeItem60HPMCE65HPMCF75H
Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.
Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.
Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.
x

Submitted successfully

We will contact you as soon as possible

Close