Construction Building HPMC-manufacture,factory,supplier from China

Appearance is White to slightly off-white fibrous or granular powder.

In addition to affecting the rheological properties of the tile adhesive, HPMC has a strong influence on the mechanical properties of the tile adhesive, such as the smoothness of operation and the sticking of the knife.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface treatmentPD100MPD150MPD200MPK40M PK100M PK150MPK200MEM60MEM70M EM100MEM150MEM200MEM6000SEM8000SEM10MSPD

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material.It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

 Tile cement mortar is used to attach tiles on concrete or block walls.

• Improve sag resistance & anti-slap• Optimize rheological behaviour, particularly the flow characteristics and workability• Enhance adhesion strength• Increase mortar yield• Cost-effective. Obtain desired thickening effect with very low dosage. MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.The applications includes:tile adhesivetile grout,joints and crack fillersgypsum plasterexterior insulation and finish system,EIFSskim coat manual plasterself-leveling compounddetergentwater-borne paintStructural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN&n

Cellulose ether, especially hydroxypropyl methyl cellulose ether (HPMC), is an important component in commercial mortar. The effects of cellulose ether on cement-based materials include water retention, thickening, air entrainment and retardation, which are excellent in giving commercial mortar. At the same time, it also affects the macro and micro structure of cement hydration products, thus affecting the mechanical properties of commercial mortar. Cellulose ethers are usually divided into two categories: surface modification and non-surface modification.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Appearance is White to slightly off-white fibrous or granular powder.

Main applicationHPMC is one of the main dispersants in PVC industry. During suspension polymerization of vinyl chloride, it can reduce the interfacial tension between vinyl chloride monomer (VCM) and water, and help VCM to be evenly and stably dispersed in the aqueous medium; Prevent the coalescence of VCM droplets at the initial stage of polymerization; Prevent coalescence between polymer particles in the later stage of the polymerization process. In suspension polymerization system, it plays a dual role of dispersion and stability protection.

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

ETONse YT series starch ether is a kind of non-ionic starch ether products suitable for building materials system such as putty, tile adhesive and mortar after careful analysis of market demand by the R&D team of ETON.This series of products through the use of special reaction process and production process, so that the product has a series of performance advantages, in putty, tile adhesive and mortar applications have a unique advantage.Excellent workability: It has excellent workability in the application of internal and external wall putty and gypsum-based plastering.Good slip resistanc

Hydroxypropyl methylcellulose a propylene glycol ether of methylcellulose, provided in differing tiers of viscosity; used as a postponing and viscosity-growing agent and pill binder, coating, and excipient in pharmaceutical preparations, and implemented topically to the conjunctiva to defend and lubricate the cornea.Formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Specific application and viscosity rangeViscosityApplication60YT HPMC65YT HPMC75YT HPMCDrug core binder5050100Tablet isolation5～505～50Tablet film coating35～5035～5035～50Slow～release35～10035～10035～100film50～

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

HPMC is the proper material for you in case you need to increase the tensile energy of gypsum plaster and different production material.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Tile cement mortar is used to attach tiles on concrete or block walls.

The hydroxypropyl methyl cellulose ether hpmc is the essential condition for thin bed technology for tile adhesive.Can be used as retarder, water retention agent, thickener and binder.For example, the performance of mortar is very different between natural sand and machine-made sand. Cellulose ether for ordinary dry mixed mortar shall have the following characteristics:Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified&nbs

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products &n

HPS main application1. in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.2. in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving. Hydroxypropyl starch with high degree of substitution can be used as printing paste.3.