HPMC E15 for drug coating-manufacture,factory,supplier from China

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

Appearance is White to slightly off-white fibrous or granular powder.

Hydroxypropyl methyl cellulose (hpmc) is a non-ionic cellulose combined ether crafted from cotton and timber through alkalization, propylene oxide and methyl chloride etherification.

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

ApplicationTile AdhesiveTile grout,Joints and Crack FillersGypsum Manual / Machine PlasterExterior Insulation and Finish System(EIFS)Skim Coat Manual PlasterSelf-leveling CompoundWater-borne paint 

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

ETON Hydroxypropyl starch ether is a kind of chemical modified starch mainly used as thickener and texturing agent for cement or gypsum based mortar products. Hydroxypropyl starch ether is used for construction.Hydroxypropyl starch ether(HPS) is nonionic and has high stability of substituting ether bond.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material.It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxypropyl Methyl Cellulose (Mellutel YT-50) is beside Polyvinylalcohol (PVA) one of the most commonly used suspending agents. Mellutel YT-50 controls the particle size and their distribution, influences the porosity and defines the bulk weight of PVC. The porosity of the polymer particles is strongly linked to the property to adsorb additives like plasticizers or stabilizers. Thereby, the properties of the polymer during processing and of the final product can be controlled. Ultra low viscous Mellutel YT-50 is the most suitable product for PVC manufacturing processes.

Food grade HPMC  , also abbreviated as hypromellose , is a kind of non-ionic cellulose ether. It is a semi-synthetic, inactive, viscoelastic polymer, often used in ophthalmology as a lubrication department, or as an ingredient or excipient in food additives, and is commonly found in various types of commodities.

Main applicationHPMC is one of the main dispersants in PVC industry. During suspension polymerization of vinyl chloride, it can reduce the interfacial tension between vinyl chloride monomer (VCM) and water, and help VCM to be evenly and stably dispersed in the aqueous medium; Prevent the coalescence of VCM droplets at the initial stage of polymerization; Prevent coalescence between polymer particles in the later stage of the polymerization process. In suspension polymerization system, it plays a dual role of dispersion and stability protection.

Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution.  It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a highly efficient w

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose mixed ether made from cotton and wood through alkalization, propylene oxide and methyl chloride etherification.

HPS main application1. in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.2.

Hydroxypropyl Methyl Cellulose products have the maximum consumption in the area of suspension polymerization of vinyl chloride in China. In the suspension polymerization of vinyl chloride, the dispersed system has a direct impact on the product, PVC resin, and on the quality of its processing and products. Hydroxypropyl Methyl Cellulose helps to improve the thermal stability of resin and control the particle size distribution(in other words, adjust PVC density), and its amount accounts for 0.025% -0.03% of PVC production.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.The applications includes:tile adhesivetile grout,joints and crack fillersgypsum plasterexterior insulation and finish system,EIFSskim coat manual plasterself-leveling compounddetergentwater-borne paintStructural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN&n

 Tile cement mortar is used to attach tiles on concrete or block walls.

ETONse YT series starch ether is a kind of non-ionic starch ether products suitable for building materials system such as putty, tile adhesive and mortar after careful analysis of market demand by the R&D team of ETON.This series of products through the use of special reaction process and production process, so that the product has a series of performance advantages, in putty, tile adhesive and mortar applications have a unique advantage.Excellent workability: It has excellent workability in the application of internal and external wall putty and gypsum-based plastering.Good slip resistanc

 It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula                          

Feature：The properties of thickening, binding, dispersing, emulsifying, film-forming, suspending, adsorbing, gelling, surface active, retaining moisture and protective colloid.Function：It has excellent enzyme resistance and emulsion stability.Formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Specific application and viscosity range                    ViscosityApplication60YT HPMC65YT HPMC75YT HPMCCreamy Cream and Desserts 4000 / /Baked goods50, 4000/4000Fried food50, 400050100, 4000Seasoning/Sauce50, 40

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.