HPMC For Medicine Hydroxypropyl Methyl Cellulose-manufacture,factory,supplier from China

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid. It is effective in thickening, adhesion, dispersion, emulsification, suspension, adsorption, surface activity, water retention and so on.  ETON Hydroxypropyl starch ether is a kind of chemical modified starch mainly used as thickener and texturing agent for cement or gypsum based mortar products.

HPMC is a multi-purpose medicinal material, can be used as thickener, dispersant, emulsifier and film-forming agent. Made in the drug tablet film coating, adhesive, can significantly improve the dissolution rate of drugs can enhance the waterproof tablets.

• Improve sag resistance & anti-slap• Optimize rheological behaviour, particularly the flow characteristics and workability• Enhance adhesion strength• Increase mortar yield• Cost-effective. Obtain desired thickening effect with very low dosage. MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance.

Hydroxypropyl methyl cellulose (hpmc) is a non-ionic cellulose combined ether crafted from cotton and timber through alkalization, propylene oxide and methyl chloride etherification.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution.  It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a highly efficient w

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Self leveling mortar includes cement～based self leveling mortar, self leveling mortar, leveling mortar, etc. it is a dry mixed powder material composed of a variety of active ingredients, which can be used by mixing water on site. The high leveled base surface can be obtained after being slightly expanded by the scraper.

Main applicationHPMC is one of the main dispersants in PVC industry. During suspension polymerization of vinyl chloride, it can reduce the interfacial tension between vinyl chloride monomer (VCM) and water, and help VCM to be evenly and stably dispersed in the aqueous medium; Prevent the coalescence of VCM droplets at the initial stage of polymerization; Prevent coalescence between polymer particles in the later stage of the polymerization process. In suspension polymerization system, it plays a dual role of dispersion and stability protection.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

This product is a multi～functional pharmaceutical excipient, which can be used as thickener, dispersant, emulsifier, film～forming agent, etc. As film coating and adhesive in oral solid preparations, it can significantly improve the stability and dissolution of drugs, and enhance the waterproof of tablets. It can also be used as a suspension aid in suspension, as a matrix material in ophthalmic preparations, as a skeleton material in hydrophilic gel skeleton sustained ～ release tablets and intragastric floating tablets.

Hydroxypropyl Methyl Cellulose (Mellutel YT-50) is beside Polyvinylalcohol (PVA) one of the most commonly used suspending agents. Mellutel YT-50 controls the particle size and their distribution, influences the porosity and defines the bulk weight of PVC. The porosity of the polymer particles is strongly linked to the property to adsorb additives like plasticizers or stabilizers. Thereby, the properties of the polymer during processing and of the final product can be controlled. Ultra low viscous Mellutel YT-50 is the most suitable product for PVC manufacturing processes.

Hydroxypropyl Methylcellulose is a product mainly designed for the manufacturing of hydroxypropylene cellulose plant capsules.

HPS main application1. in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.2. in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving.

It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula               &n

Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose mixed ether made from cotton and wood through alkalization, propylene oxide and methyl chloride etherification.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products     TypeItem60HPMCE65HPMCF7

The hydroxypropyl methyl cellulose ether hpmc is the essential condition for thin bed technology for tile adhesive.Can be used as retarder, water retention agent, thickener and binder.For example, the performance of mortar is very different between natural sand and machine-made sand. Cellulose ether for ordinary dry mixed mortar shall have the following characteristics:Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD

ETON HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material.It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

ETON HPMC can make the honeycomb ceramic product have a very dense internal structure after combustion.The addition of ETON HPMC in the honeycomb ceramic has an obvious effect on the shape preservation of the green tire, which can ensure the dimensional accuracy of the product, ensure the uniformity of the wall thickness, and reduce the rejection rate.Specification           TypeItemHPMCMethoxy %28.0～30.0Hydroxypropyl %7.0～12.0Gel temperature ℃58.0～64.0Viscosity mPa.s4000,6000,8000,10000pH5.5～8.0Loss on drying %≤4.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance. It can be used together with cellulose ether to improve the thickening features of cellulose- ethers used for products in the construction industry like plaster, filler and tile-adhesive etc.Application Data Presentation