HPS-manufacture,factory,supplier from China

• Improve sag resistance & anti-slap• Optimize rheological behaviour, particularly the flow characteristics and workability• Enhance adhesion strength• Increase mortar yield• Cost-effective. Obtain desired thickening effect with very low dosage. MELLUTEL™ YT-10 is a modified Hydroxypropyl Starch ether with excellent performance.

HPS main application1. in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.2. in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

MELLUTEL-SL400Application in the Self-levelingSelf-leveling mortar is a special dry mixed mortar product with self-leveling and self-compaction function; it is widely used in factories, hospitals, shopping malls, offices and well. Home furnishing and other places. MELLUTEL leveling  cellulose e ther products, after special process control, widely used in various cement and gypsum based leveling Product system.1.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products     TypeItem60HPMCE65HPMCF7

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

ETON HPMC(Hydroxypropyl methyl cellulose) is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries. With the development of technology, more and more thin～walled honeycomb ceramics are used.

HPMC is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries. With the development of technology, more and more thin～walled honeycomb ceramics are used.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxypropyl methyl cellulose (hpmc) is a non-ionic cellulose combined ether crafted from cotton and wood via alkalization, propylene oxide and methyl chloride etherification.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.The applications includes:tile adhesivetile grout,joints and crack fillersgypsum plasterexterior insulation and finish system,EIFSskim coat manual plasterself-leveling compounddetergentwater-borne paintStructural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN&n

HEMC are often used as water-retaining agents in (desulfurized) gypsum mortar. Years of research have shown that,water-retaining agent has a very important influence on the gypsum quality and anti-plastering layer performance of plastering gypsum.

It is broadly utilized in drymix mortar industry.

MELLUTEL-SL400Application in the Self-levelingSelf-leveling mortar is a special dry mixed mortar product with self-leveling and self-compaction function; it is widely used in factories, hospitals, shopping malls, offices and well. Home furnishing and other places. MELLUTEL leveling  cellulose e ther products, after special process control, widely used in various cement and gypsum based leveling Product system.1. Prevent settlement, stratification, segregation, etc., and ensure the flow degree and operating time of self-leveling mortar2.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving. Hydroxypropyl starch with high degree of substitution can be used as printing paste.4.pharmaceutical industry, used as&nb

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Hydroxypropyl Methyl Cellulose products have the maximum consumption in the area of suspension polymerization of vinyl chloride in China. In the suspension polymerization of vinyl chloride, the dispersed system has a direct impact on the product, PVC resin, and on the quality of its processing and products. Hydroxypropyl Methyl Cellulose helps to improve the thermal stability of resin and control the particle size distribution(in other words, adjust PVC density), and its amount accounts for 0.025% -0.03% of PVC production.

Application of low viscosity hydroxypropyl methylcellulose (HPMC) in ceramics: In the ceramic industry, it is used as an adhesive for molding surprise ceramic products, giving lubricity and water retention, and improving the original strength of raw materials.The concentrated solution is adsorbed on the surface of ceramic particles, so that the friction between particles is reduced and the lubricity is enhanced, and the manufactured molded products have the required surface smoothness and dimensional stability; The sintered ceramic products with excellent electrical properties can be obtained

Feature：The properties of thickening, binding, dispersing, emulsifying, film-forming, suspending, adsorbing, gelling, surface active, retaining moisture and protective colloid.Function：It has excellent enzyme resistance and emulsion stability.Formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Specific application and viscosity range                    ViscosityApplication60YT HPMC65YT HPMC75YT HPMCCreamy Cream and Desserts 4000 / /Baked goods50, 4000/4000Fried food50, 400050100, 4000Seasoning/Sauce50, 40

Mellutel HPMC is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products     TypeItem60HPMCE65HPMCF7