preservative-free-manufacture,factory,supplier from China

It is broadly utilized in drymix mortar industry.

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

Application of low viscosity hydroxypropyl methylcellulose (HPMC) in ceramics: In the ceramic industry, it is used as an adhesive for molding surprise ceramic products, giving lubricity and water retention, and improving the original strength of raw materials.The concentrated solution is adsorbed on the surface of ceramic particles, so that the friction between particles is reduced and the lubricity is enhanced, and the manufactured molded products have the required surface smoothness and dimensional stability; The sintered ceramic products with excellent electrical properties can be obtained

 It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula                          

Main applicationHPMC is one of the main dispersants in PVC industry. During suspension polymerization of vinyl chloride, it can reduce the interfacial tension between vinyl chloride monomer (VCM) and water, and help VCM to be evenly and stably dispersed in the aqueous medium; Prevent the coalescence of VCM droplets at the initial stage of polymerization; Prevent coalescence between polymer particles in the later stage of the polymerization process.

HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs.

 Tile cement mortar is used to attach tiles on concrete or block walls.

Appearance is White to slightly off-white fibrous or granular powder.

HPMC is a white or slightly yellowish powder, which is odorless, tasteless and non-toxic. It can be dissolved in cold water and organic mixed solvents to form a transparent viscous solution. The aqueous solution has surface activity, high transparency, strong stability, and is not affected by pH when dissolved in water. It has thickening and antifreezing effects in shampoo and body wash, and has water retention and good film-forming property for hair and skin.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Hydroxypropyl methylcellulose is a non-ionic water-soluble cellulose ether, which is made from plant fiber or natural polymer fiber through a series of chemical processes. It is odorless, tasteless, non-toxic white powder, soluble in cold water but insoluble in warm water, slowly swells and peptizes in warm water, forms a viscous colloidal solution, and cools into a solution.

The role of cellulose ether in honeycomb ceramics is very important.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

HPMC is a non-inorganic cellulose ether synthesized by a series of organic chemical methods.Appearance is White to slightly off-white fibrous or granular powder.

Cellulose water-retaining agentAt present, the most widely used in the market is hydroxypropyl methyl cellulose, followed by methyl cellulose, and then carboxymethyl cellulose. The comprehensive performance of hydroxypropyl methyl cellulose is better than that of methyl cellulose, and the water retention of the two is much higher than that of carboxymethyl cellulose, but the thickening effect and bonding effect are worse than that of carboxymethyl cellulose.

Honeycomb ceramics are widely used in power generation, desulfurization and denitrification, and automobile exhaust gas treatment. With the advancement of technology, more and more thin-walled honeycomb ceramic technology is used.

HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs.

ETON Hydroxypropyl starch ether is a kind of chemical modified starch mainly used as thickener and texturing agent for cement or gypsum based mortar products. Hydroxypropyl starch ether is used for construction.ETON HPS is a cost-saving material and is easy to obtain the required thickening.

Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution.  It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a highly efficient w

HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving. Hydroxypropyl starch with high degree of substitution can be used as printing paste.4.pharmaceutical industry, used as ta

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

ETON HPMC can make the honeycomb ceramic product have a very dense internal structure after combustion.The addition of ETON HPMC in the honeycomb ceramic has an obvious effect on the shape preservation of the green tire, which can ensure the dimensional accuracy of the product, ensure the uniformity of the wall thickness, and reduce the rejection rate.Specification           TypeItemHPMCMethoxy %28.0～30.0Hydroxypropyl %7.0～12.0Gel temperature ℃58.0～64.0Viscosity mPa.s4000,6000,8000,10000pH5.5～8.0Loss on drying %≤4.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

HPS main application1. in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.2. in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving.