HPMC For Mortar
A,Enhance water retention, improve mortar, cement, gypsum building materials too fast drying and hydration is not enough to cause poor hardening, cracking and other phenomena;
B.Increase the plasticity of mortar to improve the workability of construction and improve work efficiency;
C,Due to the increase of mortar plasticity, it can better bond the substrate and the binder;
D,Because of its thickening effect, it can prevent the slippage of mortar and binder during construction.
Appearance is White to slightly off-white fibrous or granular powder. Swells in water and produces a clear to opalescent,viscous colloidal mixture, high transparency, stable performance, HPMC dissolved in water is not affected by pH value. With thickening ability, salt resistance to low ash powder, pH stability, water retention, dimensional stability, excellent film formation, and a wide range of enzyme resistance, dispersion and adhesion characteristics.
The application areas are as follows: masonry mortar, insulation board supporting mortar, thermal insulation mortar, decorative mortar, plastering dry powder mortar, interface mortar, anti-crack mortar, waterproof dry powder mortar, caulking agent, floor mortar, etc.
Structural formula
(n～2)/2
OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3
Specification of non modified products
Type Item | PD/PDS | HPMC PK/PKS | EM/EMS |
Non surface treatment | PD100M PD150M PD200M | PK40M PK100M PK150M PK200M | EM60M EM70M EM100M EM150M |
EM200M | |||
EM6000S | |||
EM8000S | |||
EM10MS | |||
PD100MS | EM20MS | ||
Surface treatment | PD150MS | / | EM30MS |
PD200MS | EM60MS | ||
EM100MS | |||
EM150MS | |||
EM200MS | |||
Gel temperature ℃ | 58.0～64.0 | 70.0～90.0 | 70.0～90.0 |
pH | 5.0～9.0 | 5.0～8.0 | 5.0～9.0 |
Loss on drying % | ≤5.0 | ≤5.0 | ≤5.0 |
Burning residue % | ≤5.0 | ≤5.0 | ≤5.0 |
Bulk density g/L | 330～400 | 350～420 | 350～420 |
Methoxy % | 23.0～25.0 | 19.0～24.0 | 19.0～24.0 |
Hydroxypropyl % | 8.0～11.0 | 4.0～12.0 | / |
Hydroxyethoxy % | / | / | 7.0～10.0 |
Characteristics of ceramic mortar
1. good water holding capacity makes cement hydration more complete.
2. improve the wet viscosity of wet mortar and improve the bonding strength of mortar.
3. improve the spraying or pumping performance of mortar and structural strength.
4. make the insulation system have good mechanical strength, crack resistance, durability and impact resistance.
HPMC packaging and storage
Barrel or paper plastic bag lined with polyethylene film inner bag. Net weight of each bag: 25kg.
Protect from sun and rain during storage and transportation.
Popular products
Submitted successfully
We will contact you as soon as possible
